Filter
Top Products
78 Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual
Using the Telnet Console
2. Select Configure Port GMRP Settings, and press Enter.
3. Select and configure these fields:
4. Highlight
APPLY and press Enter.
5. To change an entry, repeat steps 3-4.
To configure VLANs supporting GMRP
1. From the Main Menu, select GMRP and press Enter.
2. Select
Configure VLANs Supporting GMRP, and press Enter.
3. Select and configure these fields:
4. Highlight
APPLY and press Enter.
5. To change an entry, repeat steps 3-4.
VLAN Configuration
The switch allows the assignment of an IP interface to each VLAN. A VLAN must be configured
before setting up its IP interface. You can create either a port-based or an IEEE 802.1Q VLAN. By
default, all ports belong to an IEEE 802.1Q VLAN called “default.” Although this VLAN cannot
be deleted, all member ports can be assigned to other VLANs.
To configure GVRP globally
The global GVRP flag determines whether GVRP (GARP VLAN Registration Protocol) is enabled
on the switch so that the switch can share VLAN information with other switches, and VLANs can
span multiple switches. When this flag is disabled, VLANs are confined to the physical
connections of the switch. By default, this flag is disabled.
1. From the Main Menu, select
VLAN Configurations and press Enter.
2. Use the spacebar to toggle the Switch GVRP field to
Enabled or Disabled.
3. Highlight
APPLY and press Enter.
To create or modify a port-based VLAN
1. From the Main Menu, select VLAN Configurations | Configure VLAN Settings and press
Enter.
Field Description
Configure Port Specifies which port(s) to configure (1-28).
GMRP State Specifies the state (off or on) of GMRP for this port.
Field Description
VID Specifies which VLAN ID to configure (1-4094).
Support GMRP Specifies the state (off or on) of GMRP for this VLAN