Filter
Top Products
76 Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual
Using the Telnet Console
1. From the Main Menu, select Priority Settings, and press Enter.
2. Select
Priority Based on Port, and press Enter.
3. Select and configure these fields.
4. Highlight
APPLY and press Enter.
5. To change an entry, repeat steps 3-4.
User Priority Regeneration
You can enable User Priority Regeneration to set the 802.1p priority bit to a user defined level for
all egress frames.
1. From the Main Menu, select
Priority Settings, and press Enter.
2. Select
User Priority Regeneration, and press Enter.
3. Select and configure these fields.
4. Highlight
APPLY and press Enter.
5. To change an entry, repeat steps 3-4.
Field Description
Configure port from Specifies which port(s) to configure (1-26).
Default Priority
Specifies the priority for this port. The levels are 0 —7, with 7 being the highest
priority.
Field Description
Priority 0
Specifies the regenerated priority for all egress frames which currently have a
level of 0. The levels are 0 —7, with 7 being the highest priority.
Priority 1
Specifies the regenerated priority for all egress frames which currently have a
level of 1. The levels are 0 —7, with 7 being the highest priority.
Priority 2
Specifies the regenerated priority for all egress frames which currently have a
level of 2. The levels are 0 —7, with 7 being the highest priority.
Priority 3
Specifies the regenerated priority for all egress frames which currently have a
level of 3. The levels are 0 —7, with 7 being the highest priority.
Priority 4
Specifies the regenerated priority for all egress frames which currently have a
level of 4. The levels are 0 —7, with 7 being the highest priority.
Priority 5
Specifies the regenerated priority for all egress frames which currently have a
level of 5. The levels are 0 —7, with 7 being the highest priority.
Priority 6
Specifies the regenerated priority for all egress frames which currently have a
level of 6. The levels are 0 —7, with 7 being the highest priority.
Priority 7
Specifies the regenerated priority for all egress frames which currently have a
level of 7. The levels are 0 —7, with 7 being the highest priority.