Filter
Top Products
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual 131
Using the Web Console
• All IGMP report packets will be forwarded to the router port.
• IGMP queries (from the router port) will be flooded to all ports.
• All UDP multicast packets will be forwarded to the router port. Because routers do not send
IGMP reports or implement IGMP snooping, a multi-port router connected to the router port
of the Layer 3 switch would not be able to receive UDP data streams from its ports unless the
UDP multicast packets were all forwarded to the router port.
A router port will be dynamically configured when IGMP query packets, RIPv2 multicast,
DVMRP multicast, PIM-DM multicast packets are detected flowing into a port.
To configure a static router port
1. In the left panel, click Layer 3 IP Networking.
2. In the top panel, click
Static Router Port Settings.
3. Click New and configure these fields.
4. Click
Apply.
5. To delete an entry from the table, select the entry and click
Delete.
Field Description
VLAN Name
Specifies the name of the VLAN that you want to configure a static router
port for.
Port Members
Specifies the ports that you want to set up as static router ports. To select a
port, click the port.