Filter
Top Products
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual 119
Using the Web Console
4. Click Apply.
5. To remove an entry, select the entry in the table and click
Delete.
IP Priority
You can specify an IP address so that packets with this address are given special handling, either a
higher or lower priority than normal traffic.
1. In the left panel, click
Priority Settings.
2. In the top panel, click IP Priority.
3. Click New and configure these fields.
4. Click
Apply.
5. To remove an entry, select the entry in the table and click
Delete.
Priority based on Port
You can specify a port so that packets received on this port are given special handling, either a
higher or lower priority than normal traffic.
Field Description
MAC Address MAC Address Specifies the MAC address to set a priority for.
VLAN Name Specifies the name of VLAN on which this MAC address resides.
User Priority Specifies the priority for this MAC address. The levels are 0 —7, with 7 being the
highest priority.
Source / Destination Specifies the state under which the above priority will be active. The options
are
• Destination—Packets with the above MAC address as their destination will be
given the selected priority.
• Source—Packets with the above MAC address as their source will be given the
selected priority.
• Either—All packets with the above MAC address will be given the selected prior-
ity.
Field Description
IP Address IP Address Specifies the IP address to set a priority for.
User Priority
Specifies the priority for this IP address. The levels are 0 —7, with 7 being the
highest priority.
Source/Destination
Specifies the state under which the above priority will be active. The options are:
• Destination—Packets with the above MAC address as their destination will be
given the selected priority.
• Source—Packets with the above MAC address as their source will be given the
selected priority.
• Either—All packets with the above MAC address will be given the selected
priority.