Juniper Networks E-Series Network Router User Manual


 
CHAPTER 9
Maintaining E-Series Routers
9-16
Installing a Cable-Management Bracket on ERX-7xx Models
A cable-management bracket can be installed to accommodate cables of
different sizes on ERX-7xx models. See Figure 9-10.
For wider X.21/V.35 cables, mount the bracket in the last row of
perforation holes in the chassis so that the bracket allows for maximum
spacing (A).
For smaller cables, mount the bracket closer to the front of the chassis
(B).
Use two (2) #10 self-tapping screws to secure the bracket.
Figure 9-10 Attaching a cable management bracket
Perforated area
Front of
ERX-7xx model
Mount here for wider X.21/V.35 cables
Mount in this area for smaller cables
g013767