Juniper Networks E-Series Network Router User Manual


 
6
Cabling E-Series
Routers
This chapter describes how to cable an E-series router. Before you cable
the router, ensure that you have completed all installation instructions
identified in previous chapters.
Cabling Overview
Cabling an E-series router requires the following main tasks:
1 Familiarize yourself with the module ports, and ensure that you have
the cables and wires needed to complete each cabling procedure (see
Figure 6-1).
2 Read and understand all safety warnings. (See Chapter 3,
Installation Guidelines and Requirements.)
3 (Optional) Connect timing ports.
4 Connect the SRP I/O module to the network and to a management
console.
5 Connect grounding wires to the E-series chassis.
Topic Page
Cabling Overview 6-1
Required Tools, Wires, and Cables 6-4
Cabling the SRP I/O Module 6-5
Cabling the E-Series Router for Power 6-9
Cabling I/O Modules 6-14
The Next Step 6-20