Juniper Networks E-Series Network Router User Manual


 
CHAPTER 11
System Specifications
11-6
Space Requirements 3 feet (90 cm) behind router or rack
Do not block air vents on sides of the router.
Do not place equipment that exhausts hot air to left on the right of the
router.
Be aware that router exhausts hot air from its left side.
Airflow Airflow direction is in through the right side and out through the left side.
See Figure 3-2 in Chapter 3, Installation Guidelines and Requirements.
DC Input
Voltage
Current
Power
Redundancy (input power)
–40 to –72 VDC
a
9 A @ –48 VDC
500 W maximum
2 independent line feeds
AC Input
Power required
AC line frequency
Power
90-265 VAC @ ~5 A
50-60 Hz
500 W
NEBS Certification Not yet available for the ERX-310 router
Safety Agency Certification AS/NZS 3260:1993, Safety of Information Technology Equipment
Including Electrical Business Equipment
CAN/CSA C22.2, No. 60950-00, 3rd Edition, Safety of Information
Technology Equipment
EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User’s Guide (2001)
EN60950:2000, 3rd Edition, Safety of Information Technology
Equipment
IEC 60950-1(2001-10) Ed. 1.0 Information technology equipment -
Safety - Part 1: General requirements
Low Voltage Directive (73/23/EEC)
UL 60950, 3rd Edition, Safety of Information Technology Equipment
Electromagnetic Emissions
Agency Certification
AS/NZS 3548:1995 (CISPR 22 Class A)
EMC Directive (89/336/EEC)
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance Criteria A, B, and
C
ETSI 300-386, Telecommunication Network Equipment;
ElectroMagnetic Compatibility (EMC) requirements
FCC Part 15 Class A
IECS-003 Issue 3 Class A
VCCI (Voluntary Control Council for Interference by Information
Technology Equipment)
Table 11-3 ERX-310 router specifications (continued)
Category Specification