Filter
Top Products
This section explains how to configure or change your wireless network settings.
Connecting to a wireless network
To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, use the following procedures.
Before you connect
You need:
a wireless router.
to determine whether your wireless router supports Wi-Fi Protected Set-Up (WPS).
: If you have specific questions about your router, see your router manufacturer's documentation for
more information.
Connecting to a wireless network using the Wi-Fi Set-Up Wizard
You can use the Wi-Fi Set-Up Wizard on the printer to connect to your wireless network. Use the procedure that is
appropriate for your network set-up.
Connecting to a non-WPS wireless router
To connect your printer to your wireless network, you need to know the network name, also called the Service Set
Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation
for more information.
If you have enabled security on your network, you also need to know the security string (passphrase or password),
which may be a Wired Equivalent Privacy (WEP) or a Wi-Fi Protected Access (WPA/WPA2) passphrase.
Record your network information using the correct uppercase and lowercase letters.
Network Name (SSID):
Security String (case-sensitive):
1. Press .
2. Press
to select Network Settings, then press OK.
3. With Wi-Fi Set-Up Wizard selected, press OK.
: The Wi-Fi radio turns on when you select Wi-Fi Set-Up Wizard.
The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then
displays the list in order of signal strength. For example:
If there are more networks than can be shown on the LCD, press to view them.
2
Networking Your Printer
www.kodak.com/go/aiosupport 5