Filter
Top Products
Your printer can send and receive faxes in either black and white or colour.
Before you begin faxing
Before you can send or receive faxes, you must connect your printer and set up the fax options.
Connecting the printer for faxing
Selecting the country/region
For the fax to work properly, the country or region selected on the printer must match your location. This setting
determines how your faxes are sent and received.
1. Press .
2. Press to select Printer Settings, then press OK.
3. Press to select Country/Region, then press OK.
4. Press to select your country or region, then press OK.
Determining your telephone system type
The instructions for setting up your printer for faxing differ depending on the type of telephone service you have.
Determine the type of telephone service you have, and connect your printer accordingly.
:
Use the phone cord that was provided with the printer. If you use any other phone cord, you may not be able to
send or receive faxes successfully.
Standard telephone service — telephone service that uses dedicated telephone wiring to transmit only phone
signals
Cable telephone service — telephone service that is delivered by a cable television service
Digital Subscriber Line (DSL) — telephone service that uses the wires of a local telephone network to transmit
digital data over cables
Internet telephone service (Voice-Over-Internet Protocol or VOIP) — telephone service delivered by an Internet
provider
Connecting to a Standard or Cable telephone service
If you have Standard or Cable telephone service, connect one end of the phone cord that came with the printer to
the LINE IN port on the back of the printer and the other end to the wall phone jack.
9
Faxing
56 www.kodak.com/go/aiosupport