Filter
Top Products
4-32 5E6155 January 10, 2006
Troubleshooting
3. Remove the jammed film in the film path from the processor to the
sorter.
4. Grasp the film and pull upward at a 90° angle.
5. Close the hood.
6. If you cannot clear the jammed film, call an Authorized Service
Provider of Kodak products.
Clearing Film Jams from
Area 6
The sorter is Area 6. If film jams in this area, an error message appears on
the local panel.
Sorter Knob
When the Film Jam in Area 6: error message appears:
1. Touch the Show Jam button. The Door Control screen appears and
the affected area is highlighted.
2. Open the hood to its first locking position.
CAUTION:
Hot surface. Drum and rollers inside the processor are hot.
Exercise caution when working in the drum area.
Release latch