Film Technical Information
January 10, 2006 5E6155 6-5
Dissipating Heat DryView Laser Imagers use controlled heat to develop DryView Laser
Imaging Film. The heat has virtually no effect on the air temperature of the
work area. The amount of heat dissipated into an area during a day is
typically less than the heat generated by four 100-watt light bulbs.
Recycling Film According to the Environmental Protection Agency (EPA) standards,
DryView Laser Imaging Film is not considered hazardous and requires no
special disposal procedures. However, the film does contain silver and
polyester that may be recovered by using one of several recycling
processes.
Call your local Kodak sales representative or go to the Kodak website
www.kodak.com/go/KES
Refer to Publication J700 and see “End of Life Management' section.