Filter
Top Products
Troubleshooting
January 10, 2006 5E6155 4-3
Local Panel Error
Messages
The following table lists the error messages displayed on the local panel.
When an error message is displayed, perform the operator action listed in
the table for that message.
When an error message occurs, an audible alarm will sound.
To silence the audible alarm:
1. When an error message appears, touch anywhere in the error pop-up
menu.
2. When a no-media message appears, touch any tray button or the Job
Management button on the Status screen.
NOTE: The laser imager prints a job only with the specified size/media
base type requested. If the size/base is not loaded, the print
request is put into the “No Media” queue and the laser imager
waits for the correct type to be loaded.
If this action does not clear the error message, call an Authorized Service
Provider of Kodak products. When you make a service call, be prepared
with the error message and message number (see “Calling for Support” on
page 4-33).
Preventive Maintenance Icon
NOTE: The laser imager displays a local panel icon when preventive
maintenance and cleaning are recommended. Preventive
maintenance and cleaning ensure optimum imager performance.
The preventive maintenance message will not interfere with
normal operation and is intended to let you schedule a convenient
time for preventive maintenance performed by an Authorized
Service Provider of Kodak products.
No Media The imager can accept job requests, but
film is not available for at least 1 current
job.
Offline The imager will not accept any DICOM
job requests.
Main Status Screen Details