Filter
Top Products
Troubleshooting
January 10, 2006 5E6155 4-29
4. Remove the jammed film. If the film is jammed in one of the feed
roller sets, turn the rollback knob in the appropriate direction to free
the film.
5. Close the front door.
6. If you cannot clear the jammed film, call an Authorized Service
Provider of Kodak products.
Clearing Film Jams from
Area 4
The film processor drum is Area 4. If film jams in this area, an error
message appears on the local panel.
Clearing Film Jam Area 4
When the Film Jam in Area 4: error message appears:
1. Touch the Show Jam button. The Door Control screen appears and
the affected area is highlighted.
2. Open the hood to its first locking position.
CAUTION
:
Hot Surface. Drum and rollers inside the processor are hot.
Exercise caution when removing jammed film from the
processor.
Cover
Rollers
Drum
Lift handle
Clamps