Filter
Top Products
Troubleshooting
January 10, 2006 5E6155 4-9
21-624 Calibration Failed: Film
Density Readings not
Monotonic
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Try a new film cartridge.
2. If the error persists, call an
Authorized Service
Provider of Kodak
products.
21-631 Calibration Failed: Film
Dmin Outside Target
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Try a new film cartridge.
2. If the error persists,
disable AIQC for this film
cartridge (see “Automatic
Image Quality Control
(AIQC)” on page 3-21).
21-632 Calibration Failed: Film
Dmax Outside Target
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Try a new film cartridge.
2. If the error persists,
disable AIQC for this film
cartridge (see “Automatic
Image Quality Control
(AIQC)” on page 3-21).
22-116 Film Jam in Area 1: Film
Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Open the drawer.
2. Close the cartridge to
prevent film from fogging.
3. Remove any film.
4. Close the drawer.
22-118 Internal Hardware Failure:
Film Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Restart the laser imager.
2. If the error persists, call an
Authorized Service
Provider of Kodak
products.
22-119 Internal Hardware Failure:
Film Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Open the drawer.
2. Close the cartridge to
prevent film from fogging.
3. Remove any film.
4. Close the drawer.
Number Message Display Message Details Operator Action