Filter
Top Products
A-61560 June 2006 99
Vacuuming the scanner Before cleaning the imaging area, it is suggested that you vacuum the
inside of the scanner to remove any dust and debris.
Cleaning the imaging
area
1. Remove dust and debris from this area by using a Staticide wipe or
a small brush. Be careful not to scratch the imaging area when
cleaning.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information.
2. Wipe the upper and lower imaging area again with an almost-dry
Staticide wipe to remove any streaks.
3. When finished, close the scanner cover.