Filter
Top Products
A-61560 June 2006 65
9. If you look on the Image Settings window, the Side drop-down box
will now have two entries: Both: Color (24 bit) and Both: Black
and White (1bit). Select one side and adjust the settings on the rest
of the tabs of the Image Settings window (General, Size,
Adjustments and Enhancements).
10.Then select the other side and make the appropriate selections for
that type of image. You may want to scan a test document using the
Preview window while you make these changes.
11. Save your Setting Shortcut and scan your test documents using the
Setting Shortcut you just set up. Review the resulting images to
determine if the scanner is detecting and outputting color
documents the way you want them. If you need to improve the
results, repeat the steps above until the get the results you want.
Using different settings
for each side of a
document - Example 3
By default, image settings you select using the TWAIN datasource are
applied to both sides of a two-sided document. For more advanced or
complex needs, you may need to have different configurations for each
side of the document. By clicking the Different settings per side
checkbox, the Front and Back selections in the Side drop-down box on
the Image Settings window are available.