Filter
Top Products
42 A-61560 June 2006
Most of the options you’ll want to set are available on these two
windows:
• Image Settings: clicking the Settings button on the main Kodak
Scanner window, displays the Image Settings window. From this
window you can set your image processing parameters by using the
General, Size, Adjustments and Enhancements tab. You can also
access the Device settings, by clicking the Device button or the
Advanced settings by clicking the Advanced button.
• Device Settings: the Device button is located on the Image Settings
window. When you select Device, you will have access to the
General and Multifeed tabs. From the Device Settings window, you
can also access Diagnostics.
The procedures that follow describe how to configure a customized
Setting Shortcut. Complete descriptions of the features and options on
the Kodak Scanner window and tabs are found in the section entitled,
“The main Kodak Scanner window”.
NOTE: Settings Shortcuts can sometimes be overridden by your
scanning application. If this happens, the Shortcut you call will
appear in the main Kodak Scanner window in italics with the
word <Changed> next to it. This is normal behavior for an
application that does not use Settings Shortcuts and downloads
its preferred individual settings to the scanner first and then
provides access to the TWAIN datasource.
Selecting Image settings From the main Kodak Scanner window:
1. Select a predefined Setting Shortcut from the Settings Shortcuts list
box. Choose a Setting Shortcut that describes as closely as
possible the image output you desire.
2. Determine if you want to capture an electronic image of the front of