Filter
Top Products
A-61560 June 2006 13
Turning on the scanner
and finalizing Kodak
Driver Software
installation
When the USB cable and power connections have been made, and the
Kodak Software Drivers have been properly installed, the installation
will be complete when the scanner is turned on.
1. Use the power switch on the back of the scanner to turn the scanner
on (I).
When you turn on the scanner, the scanner goes through an
initialization process. When it is finished and ready to scan, the LED
indicator will stop flashing and stay green.
NOTES:
• The following windows are based on Windows XP. However,
depending on the computer operating system you are using,
these windows may be different.
• If a flatbed is attached, the New Hardware window may be
displayed once for the scanner and once for the flatbed.
Your operating system will now auto detect the scanner.
2. Click Next. Kodak has successfully tested the i1200/i1300 Series
Scanners with Windows XP.