Filter
Top Products
A-61560 June 2006 23
Document
preparation
• A batch of documents to be fed into the scanner must be arranged so
the leading edges of all documents are aligned and centered in the
input tray; this allows the feeder to introduce documents into the
scanner one at a time.
• Staples and paper clips on documents may damage the scanner and
documents. Damage resulting from scanning documents with
staples, paper clips or other metallic objects are not covered by
warranty. Remove all staples and paper clips before scanning.
• Documents should be in good condition.
Paper Types: Bond, Laser, Inkjet, Offset
NOTE: Chemically coated papers may cause excessive wear/swelling
of the rollers.
Paper inks: All inks on the paper must be dry before scanning is
started. This includes: Standard offset printing, Inkjet printer, Thermal
transfer, Handwriting inks.
Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other
similar correction fluids should be dry before scanning is started.
Paper Weights: 34 g/m
2
to 413 g/m
2
(9 to 110 lbs.)
Maximum Document Size:
• Automatic Document Feeder — 215 x 863 mm (8.5 x 34 in.)
• Flatbed — 215 x 297 mm (8.5 x 11.69 in.)
Minimum Document Size: 63.5 x 50 mm (2.5 x 2 in.)