Filter
Top Products
A-61560 June 2006 73
Using the ISIS Driver The ISIS Driver is software that communicates with the scanner. This
driver is created and maintained by EMC Captiva and is provided with
the scanner by Kodak. Many scanning applications support ISIS drivers
and this driver can be used to interface with them.
This section provides descriptions of the options on the tabs of the main
ISIS Driver window and how to set these options.
For the purpose of this manual, all displayed windows assume the
features available on the Kodak i1220/i1320 Scanners. If you have a
Kodak i1210 or i1310 Scanner, all options are limited to one-sided
scanning only.
See the section entitled, “Starting the Scan Validation Tool” earlier in
this chapter to access the main ISIS Driver window.
The main ISIS Driver
window
The main ISIS Driver window provides a set of 9 tabs. You can select
each of these tabs and make any choices necessary to meet your
scanning needs. The buttons on the bottom of the window apply to all
the tabs.
Default when you select Default, the values will be reset to the
factory defaults.
Copy this function is only available when scanning two-sided
documents. The Copy button provides a convenient way to set up the
color, grayscale or black and white image settings on one side and
transfer them to the other. For example, if you highlight and set up
Front Image #1, you can use the Copy button to duplicate those
settings for Back Image #2.
OK saves the values set on all tabs.
Cancel closes the window without saving any changes.