Filter
Top Products
A-61560 June 2006 95
Cleaning or replacing the
feed module
Degradation of feeder performance, multiple feeds, stoppages, etc.
indicate a need to change the feed module. Certain paper types such
as carbonless paper or newsprint, or failure to clean regularly, and/or
use of non-recommended cleaning solvents (do not clean with alcohol)
can shorten the feed module life.
For additional feed modules, see the section entitled, “Supplies and
consumables” later in this chapter.
NOTE: The paper present sensor is located to the right of the feed
module. Be careful not to damage the paper present sensor
when removing or cleaning around the feed module.
1. Push against the raised edge of the feed module cover and lift it up
and out of position.