Filter
Top Products
90 A-61560 June 2006
5 Maintenance
Cleaning the scanner Your scanner needs to be cleaned periodically. If your documents do
not feed easily, if several documents feed at the same time or if streaks
appear on your images, it is time to clean your scanner. The section
entitled, “Supplies and consumables” at the end of this chapter
provides a listing of the supplies required to clean your scanner.
IMPORTANT: Use only non-flammable cleaners such as those provided
through Kodak Parts Services. Do not use household
cleaners and solvents.
Do not use cleaners in confined areas, use with adequate
ventilation.
Do not use cleaners on hot surfaces. Allow surfaces to
cool to ambient temperature before use.
Opening the scanner
cover
• Press the scanner cover release lever and pull the scanner cover
down.
• When you finish cleaning the scanner or replacing a part, close the
scanner cover.
NOTE: The scanner cover cannot be opened when the input tray is in
the closed position. The photo above shows the input tray has
been removed. To remove the input tray, gently push the input
tray to the right or left to release the pin from the slot, and lift the
input tray out of position.
IMPORTANT: Only use the tilt feature when the scanner cover is
closed.