Filter
Top Products
62 A-61560 June 2006
Setting up automatic
color detection -
Example 1
In this example, let’s assume you want to configure a two-sided
document stream of mixed color business documents and want the
scanner to output either a color or a black and white image for each
side of a document based on the scanner detecting the amount of color
in each image. To configure this correctly do the following:
1. Click Advanced on the Image Settings window to display the
Advanced tab.
2. Select Two Sided from the Input document is drop-down box.
3. Make sure that the Different settings per side checkbox is not
checked.
4. Select One – based on document content from the Images per
side drop-down box. The Images to Configure area will now be
displayed on the Advanced tab and will contain a Color image item
and a Black and White image item. The Content Settings tab will
also be displayed.
5. If you want a grayscale image to be delivered instead of a color
image when enough color is detected in the document, click the
Change icon and select Grayscale.
6. Click the Content Settings tab. Unless you have selected the
Different Settings per side checkbox in Step 3, the Side drop-down
box on the Content Settings tab will read Both and be grayed out.
7. Click on the Sensitivity drop-down box and select the sensitivity you
want the scanner to use when looking for color in each document.
Low is the default, and will produce the fewest color images in the
document stream, while Medium and High will increase the number
of color documents produced. When finished, the Advanced tab will
look like this: