Scanning
2
C550 2-94
Book Copy (Book Scan)
Select the method for scanning page spreads. The following four scanning
methods are available. In addition, the binding position and erase settings
can be specified.
The document can be scanned while erasing the shadows typical for page
spreads.
2
Note
Specify the size of the page spread as the scan size.
If a width to be erased around the document is specified with “Frame
Erase” with the “Book Copy” function, the same settings are also applied
on the Frame Erase screen (displayed from the Erase screen).
Setting Description
Book Spread Select this setting to scan a page spread as a single page.
Separation Select this setting to scan a page spread as two separate pages (left
and right).
Front Cover Select this setting to scan the first page as the front cover.
Front + Back Covers Select this setting to scan the first page as the front cover, the second
page as the back cover, and the remaining pages as the body.
Parameter Description
Frame Erase An area around the edge of the document can be erased. Areas with
a width between 1/16 and 2 inches on the North American (inch) model
(between 0.1 and 50.0 mm on the European (metric) model) can be
specified separately for the left and right sides and the top and bottom.
Center Erase An area along the center of the document can be erased. Areas with a
width between 1/16 and 1-3/16 inches on the North American (inch)
model (between 0.1 and 30.0 mm on the European (metric) model) can
be specified.