Filter
Top Products
Network Settings
4
C550 4-109
4.15 TCP Socket Settings
Specify the TCP socket settings. TCP socket is used during data transmis-
sions between the computer application and this machine.
TCP Socket
Select whether or not the TCP socket setting is used. Settings can be spec-
ified for the following.
2
Note
If “TCP Socket Setting” is set to “OFF”, it may no longer be possible to
use some applications on the computer.
If authentication is performed with PageScope Authentication Manager,
specify the SSL/TLS settings, and then enable the “Use SSL/TLS” of the
TCP Socket and OpenAPI settings.
For details on the OpenAPI settings, refer to “Open API Settings” on
page 3-73.
When SSL settings are not specified
When SSL settings are specified
Parameter Description
Port Number Specify the port number to be used. To change the setting, press
the [C] (clear) key, and then use the keypad to type in the desired
port number. (Range: 1 to 65535)
Parameter Description
Use SSL/TLS Select whether or not SSL/TLS is used in communication where
TCP socket is used.
Port Number Specify the port number to be used. To change the setting, touch
[Input], press the C (clear) key, and then use the keypad to type in
the desired port number. (Range: 1 to 65535)
Port Number (SSL/TLS) Specify the port number to be used with SSL/TLS communication.
To change the setting, touch [Input], press the C (clear) key, and
then use the keypad to type in the desired port number. (Range: 1
to 65535)