Konica Minolta IP-011 Printer User Manual


 
Introduction
viii IP-011 Printer Controller
System Requirements
Windows
The following are required to print from the Windows*-compliant computers to the Printer Controller.
Computers on which Windows 95/98, WindowsNT 4.0 can run
CD-ROM drive (necessary to install the user software)
In case of using Windows 95/98
Microsoft Windows 95/98
32MB RAM or more
In case of using Windows NT 4.0
Microsoft Windows NT 4.0 and NT Service Pack 3
32MB RAM or more
Parallel Port
The following are required to print to the Printer Controller by way of the parallel port.
Windows-compliant computers
Minimum RAM capacity suitable for computers (Refer to the section of each operation system
described above.)
IEEE 1284 parallel cable
One end of the cable is required to have an amphenol 36 pin male connector (connected to the
Printer Controller).