Filter
Top Products
Chapter 3 Printer Driver
3-20 IP-011 Printer Controller
In addition, when Staple is specified, you can not select Alternate.
You can not staple at two positions for the paper of B5R or smaller.
Stapling is performed in accordance with orientations as follows:
1- Left (portrait) 1- Left (landscape)
1- Right (portrait) 1-Right (landscape)
2-Left (portrait) 2-Left (landscape)
2- Top (portrait) 2-Top (landscape)
Timeout settings
By using [Detail] tab-[Timeout Settings], the
timeout value is set.
The [Not selected] box is used to set the waiting
time until a printer becomes available of printing
in the unit of second when a computer starts
outputting print data. If the waiting time exceeds
this set value, a printer error is shown and the
job is automatically cancelled.
The [Transmission retry] box is used to set the
waiting time until a printer a printer becomes available of printing in the unit of second when a
computer fails to output once and outputs print data again. If the waiting time exceeds this set
value, a printer error is shown and the job is automatically cancelled.
T