Filter
Top Products
Chapter 3 Printer Driver
IP-011 Printer Controller 3-15
Orientation
Select either [Portrait] or [Landscape] from the
list shown by clicking the [▼] button beside [Set
up] tab-[Orientation] box.
Default of Orientation is Portrait.
Output tray
Select an output tray from the list shown by
clicking the [▼] button beside [Setup] tab-
[Output Tray] box. When [None] is selected in
the Finisher settings, or When the Finisher is
not installed, other settings than [Printer's
Default] can not be selected.
Page protection
By using [Print Quality] tab-[Protection] box, you
can set Page Protection. Page Protection is a func-
tion to secure memory for printing complicated
characters and image documents in advance.
Page Protection completely develops one page
of print data before actual printing starts. This se-
cures printing of each page and avoid the memory
overrun error.
Select either [Auto] or [On] from the list shown
by clicking the [▼] button beside the [Page Protection] box.
Default of Page Protection is [Auto].
Normally, set this setting to [Auto]. If an error occurs, set it to [On]. When it is set to [ON], the print
speed decreases and more memory is used, but a print error may be reduced.
Paper tray
Select a paper tray you would like to use from
the list shown by clicking the [▼] button beside
[Setup] tab-[Paper Tray] box.
When [Auto] is selected, a paper tray with paper
which a user specified from an application by
using [Konica IP-011 Printer Controller Driver
Properties] is automatically selected.
In order to use ,[B6R], set to [Bypass].
In addition, when the bypass tray is selected,
you can select [OHT Film] from paper types of the [Paper] tab.
P