Konica Minolta IP-011 Printer User Manual


 
Chapter 2 Setup
IP-011 Printer Controller 2-7
Installation to WindowsNT4.0
Only authorized system administrators or printer administrators are allowed to install the Konica IP-011 printer
driver to WindowsNT4.0.
Please keep the “User Software CD” on hand since it is required to install the printer driver.
Printer Management on WindowsNT
Since WindowsNT is an operating system made specially for the network operation, it is equipped
with heavier security functions than other Windows.
According to the security level (access right) of the user, the range of operations and settings of the
installed printers allowed to the user is limited.
The following figure shows the access right of the Windows NT compliant printers and its operation
range.
Access Right
No rights
Printing
Document
Management
Full control
Operation Range
No operations of printers are allowed.
Execution of document printing and the following print
conditions of each document are allowed to be set.
Operations related to printing
(selection of a paper size and a paper tray, etc.)
Operations related to graphics
(processing of resolution and halftone, etc.)
Printer functions (selection of functions peculiar to the copier)
Control of document setting
Pause, restart, reprinting, and deletion of documents
All of "Print" and "Document Management"
Pause and restart of the printer and deletion of all documents
Settings and changes of printer information
Deletion of the printer
Settings and changes of printer access rights
After installing the printer driver, set the appropriate access rights to printer users.
Refer to the “System Guide” of WindowsNT for how to set access rights of the printer.