Kyocera 1650 All in One Printer User Manual


 
Copier Functions
1-2
Paper Source Selection
Perform the following procedure to select a paper source (cassette or multi-bypass tray) with the
desired paper size.
1
Set the original.
If Auto is displayed on the message display, copy
paper of the same size as the original is automatically
selected.
Notes This auto paper selection function can be disabled. (For details, see Paper Selection on
page 3-4.)
You can set a paper size for the cassette. (For details, see Paper Size (cassettes 1 to 4) on
page 3-13.)
You can set a paper type for the cassette. (For details, see Paper Type (cassettes 1 to 4) on
page 3-14.)
2
To change the paper size, press the Paper Select key
to select the desired paper source.
Notes When using the multi-bypass tray, set the paper size and the paper type referring to
Multi-Bypass Tray Settings on page 3-26.
You can set the machine to display the Bypass Paper size screen when the multi-bypass
tray is selected. (See Multi-Bypass Tray Confirmation Display on page 3-14.)
3
Press the Start key. Copying starts.
Auto
1
100%
Ready to copy.
Auto