Filter
Top Products
Printer Settings
2-22
Emulation
Note You can set the emulation for each interface.
Emulation Mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL, KPDL, KPDL (AUTO), Line
Printer, IBM Proprinter, Diablo 630, EPSON LQ-850
If you set KC-GL, you can set the thickness of the pen and the page size.
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be
automatically performed according to the print data.
If you set KPDL or KPDL (AUTO), the details of any error that occurs during printing can be printed.
1
Press the Printer key.
2
Press the S key or the T key to select MENU.
3
Press the Enter key.
4
Press the S key or the T key to select Emulation.
5
Press the Enter key.
6
Press the S key or the T key to select the desired
interface.
7
Press the Enter key.
8
Press the S key or the T key to select the desired
emulation.
9
Press the Enter key.
If you have selected KC-GL, set KC-GL Pen Thickness.
If you have selected KPDL or KPDL (AUTO), set KPDL Error Printing.
If you have selected KPDL (AUTO), perform KPDL (AUTO) Alternative Emulation Selection.
GO
CANCEL
Ready
MENU
Print Status Page
Menu
Interface
Emulation
Back
Parallel
Interface
Network
Back
PCL 6
Emulation
KC-GL