Filter
Top Products
Printer Settings
2-17
4
Press the S key or the T key to select the desired
transmission/reception mode for the parallel interface.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Network Setting
To perform network printing, network setting is required. This section describes the setting required
for using the network function.
Note Before setting the IP address, ask your network administrator to obtain the address and prepare it.
NetWare Frame
When connecting to a NetWare network, turn this setting On.
1
Display the Interface screen. (See How to Display the Interface Screen on page 2-16.)
2
Press the S key or the T key to select Network.
3
Press the Enter key.
4
Press the S key or the T key to select NetWare.
5
Press the Enter key.
6
Press the S key or the T key to select On or Off.
7
Press the Enter key. If you have selected On, Change # is displayed.
8
Press the S key or the T key to select Change #.
9
Press the Enter key.
10
Press the S key or the T key to select the frame
mode.
11
Press the Enter key.
Back
Auto
Parallel
Normal
Back
Parallel
Interface
Network
Back
NetWare
Network Setting
TCP/IP
Back
On
NetWare
Off
On
NetWare
Off
Change #
Back
Auto
NetWare Frame
802.3