Filter
Top Products
Printer Settings
2-49
3
Press the Enter key.
4
Press the S key or the T key to select Short edge
bind or Long edge bind.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Output Destination
Set the paper output destination.
Note This item is displayed only if the optional finisher or job separator is installed.
1
Display the Paper Handling screen. (See How to Display the Paper Handling Screen on
page 2-47.)
2
Press the S key or the T key to select Stack
Select [Stack Slect].
3
Press the Enter key.
4
Press the S key or the T key to select the desired
paper output destination.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Override A4/Letter
The A4 and 8 1/2 × 11" (Letter) sizes can be regarded as a size that can be used in common.
1
Display the Paper Handling screen. (See How to Display the Paper Handling Screen on
page 2-47.)
2
Press the S key or the T key to select Override
A4/LT.
3
Press the Enter key.
Duplex Mode
Back
None
Short edge bind
Setting Output destination
Top tray Output tray of main body
Finisher Optional finisher
Job Separator Optional job separator
Bypass Mode
Paper Handling
Feed Select
Stack Select
Back
Top tray
Select Output Tray
Finisher
Paper Handling
Feed Select
Stack Select
Override A4/LT