Kyocera 1650 All in One Printer User Manual


 
Copier Functions
1-18
Offset Copying
For copying of multiple sets, the orientation of the copies can be changed at the end of each set for
easy classification.
Notes If the optional document processor or finisher is not installed, use this function with sort
copying.
You can select whether or not to turn on the offset mode at a default setting. (See Offset
Copying on page 3-9.)
When setting the offset copying, turn the auto rotation on. (See Auto Rotation on page 1-29.)
The paper sizes that can be used for offset copying are limited to A4, B5, 11 × 8
1/2", and 16K.
1
Set the original.
2
Press the Offset key.
3
Press the Sort key.
4
Input the number of copies and press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
5
Replace the original and press the Start key. Scanning of the original is performed.
6
When all originals have been scanned, press the Enter key. Copying starts.