Filter
Top Products
Printer Settings
2-24
KPDL Error Printing
The details of any error that occurs during printing in the KPDL emulation mode can be printed.
Continue the procedure from step 9 of Emulation Mode Selection to set this item as shown below.
1
Press the S key or the T key to select Print KPDL
Errs.
2
Press the Enter key.
3
Press the S key or the T key to select On or Off. If
you set On, the details of any error will be printed.
4
Press the Enter key.
5
Press the Reset key. The message display returns to the printer basic screen.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be
automatically performed according to print data. Continue the procedure from step 9 of emulation
mode selection to set this item as shown below.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, DIABLO 630,
EPSON LQ-850
1
Press the S key or the T key to select Alt.
Emulation.
2
Press the Enter key.
3
Press the S key or the T key to select the desired
emulation mode.
4
Press the Enter key.
5
Press the Reset key. The message display returns to the printer basic screen.
Back
Print KPDL Errs
KPDL
Back
On
Print KPDL Errs
Off
Back
Alt. Emulation
KPDL (AUTO)
Print KPDL Errs
Back
PCL 6
Alt. Emulation
KC-GL