Filter
Top Products
System Menu
3-20
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Fax Output Destination
Set the paper output destination with priority for received fax data and various reports.
Note This item is displayed only if the optional fax kit and finisher or job separator are installed.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Fax Output
Destn.
3
Press the Enter key.
4
Press the S key or the T key to select the desired
output destination.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Default Operation Mode
Select the default screen to be displayed when the power is turned on from the copy screen or the
fax screen.
Note This item is displayed only if the optional fax kit is installed.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Main mode.
3
Press the Enter key.
4
Press the S key or the T key to select Copy mode or
Fax mode.
Setting item Output destination
Top tray Output tray of main body
Finisher Tray Output Optional finisher
Job separator Optional job separator
Machine default:
Low power time 30Min.:
Copy Otput Destn Top tray:
Fax Output Destn Top tray:
Fax Output Destination:
Top tray
Finisher Tray Output
*
Machine default:
Copy Otput Destn Top tray:
Fax Output Destn Top tray:
Main mode Copy:
Select the main mode:
Copy mode
Fax mode
*