Filter
Top Products
Copier Functions
1-27
Border Erase Mode
Shadows that may appear around the edges of copies can be erased.
The following modes are available for border erase function.
Note You can set the default value of the border erase width. (See Border Erase Width Default Value
on page 3-10.)
1
Set the original.
2
Press the Border Erase key.
3
Press the S key or the T key to select Sheet Erase
or Book Erase.
4
Press the Enter key.
5
Press the < key or the > key to set the border erase
width. You can set the width to 1/8" to 3/4" in 1/8"
increments [1 mm to 18 mm in 1 mm increments].
6
Press the Enter key.
7
Press the Start key. Copying starts.
Mode Description
Sheet Erase Use this mode to erase shadows that may appear around the edges of
copies made from sheet originals. You can set the width of the border
to be erased to 1/8" to 3/4" in 1/8" increments [1 mm to 18 mm in 1 mm
increments].
Book Erase Use this mode to make clean copies from a thick book. You can set the
width of the border to be erased to 1/8" to 3/4" in 1/8" increments
[1 mm to 18 mm in 1 mm increments].
Border Erase:
Sheet Erase
Book Erase
1/8"
Border Erase width:
1/4" 3/4"