Kyocera 1650 All in One Printer User Manual


 
Printer Settings
2-48
Paper Source
Set the paper source to be selected first.
1
Display the Paper Handling screen. (See How to Display the Paper Handling Screen on
page 2-47.)
2
Press the S key or the T key to select Feed Select.
3
Press the Enter key.
4
Press the S key or the T key to select the desired
paper source.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Duplex Print Mode
Set the binding position on finished prints in duplex printing.
Note This setting is displayed only if the optional duplex unit is installed.
1
Display the Paper Handling screen. (See How to Display the Paper Handling Screen on
page 2-47.)
2
Press the S key or the T key to select Duplex Mode.
Back
Bypass Mode
Paper Handling
Feed Select
Back
Bypass
Feed Select
Cassette 1
Setting Binding position
Short edge bind Binding at a short edge
Long edge bind Binding at a long edge
Paper Handling
Bypass Mode
Feed Select
Duplex Mode