Filter
Top Products
Printer Settings
2-55
6
Press the S key or the T key to select On or Off.
7
Press the Enter key.
8
Press the Reset key. The message display returns to the printer basic screen.
Stapling Error Detection
You can select whether or not to display Add Staples and Press GO when staples have run out
while stapling is performed.
Note This setting is displayed only if the optional finisher is installed.
1
Display the Others screen. (See How to Display the Others Screen on page 2-51.)
2
Press the S key or the T key to select Finishing
Error.
3
Press the Enter key.
4
Press the S key or the T key to select Staple
Setting.
5
Press the Enter key.
6
Press the S key or the T key to select On or Off.
7
Press the Enter key.
8
Press the Reset key. The message display returns to the printer basic screen.
Back
On
Duplex Print Process
Off
Setting Processing
On • If you select GO, printing is performed without stapling.
• If you select CANCEL, printing is canceled.
Off Printing is performed without stapling.
Others
Resource Prot.
Auto Continue
Finishing Error
Finishing Error
Back
Proces. Duplex print
Staple Setting
Staple Setting
Back
On
Off