Kyocera 1650 All in One Printer User Manual


 
Printer Settings
2-19
7
Press the Enter key.
DHCP
This machine supports DHCP (Dynamic Host Configuration Protocol). When using DHCP, turn
DHCP On.
1
Display the TCP/IP screen referring to steps 1 to 5 of TCP/IP setting.
2
Press the S key or the T key to select Change #.
3
Press the Enter key.
4
Press the S key or the T key to select DHCP.
5
Press the Enter key.
6
Press the S key or the T key to select On.
7
Press the Enter key.
IP Address
Register the IP address of this machine.
Notes The IP address that should be registered here differs depending upon your network
environment. Check with your network administrator before performing this setting.
If you use the following procedure to manually register the IP address, be sure to turn the
DHCP setting Off and the TCP/IP setting On.
1
Display the TCP/IP screen referring to steps 1 to 5 of TCP/IP setting.
2
Press the S key or the T key to select Change #.
3
Press the Enter key.
4
Press the S key or the T key to select IP Address.
5
Press the Enter key.
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
Back
On
DHCP
Off
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address