Filter
Top Products
Copier Functions
1-11
Interrupt Mode
The interrupt mode can be used to stop output of copying or another job temporarily and to output
urgent copy or print data or received fax data. After the interrupt processing is complete, the
interrupted job can be resumed.
The following modes are available for the interrupt function.
During a Copy Job
1
Press the Interrupt key. Interrupt mode OK
[Interrupt mode] is displayed.
2
Store the originals for the current copying.
3
Set the original for interrupt copying and perform copying.
4
After the interrupt copying is complete, press the Interrupt key. The settings for the interrupted job
are restored.
5
Replace the original with the originals that have been stored. Press the Start key to resume
copying.
During Output
1
Press the Interrupt key during output. Select Interrupt mode is displayed.
Note If the machine has neither print data nor received fax data, Interrupt mode OK [Interrupt
mode] is displayed. Proceed to step 4.
2
Press the S key or the T key to select the desired
interrupt mode.
Mode Description
Interrupt copy • This mode can be used to stop copying and to make a copy of
a different original at different settings. After the interrupt copy
has been produced, the interrupted copying can be resumed at
the same settings in effect prior to the interruption.
• This mode can also be used to stop output of a job and to make
a copy of another job. After the interrupt copy has been
produced, the interrupted job is resumed.
Priority output This mode can be used to interrupt output of a job and to output
print data or received fax data with priority. After priority output is
complete, the interrupted job is resumed.
Note
To use the fax functions, the optional fax kit must be installed.
Select Interrupt mode.
Interrupt copy
Priority:Printer
Priority:Fax