Filter
Top Products
Memory Card
2-43
Reading Macros from a Memory Card
Macro data on a memory card can be registered on the printer. Registered macro data can be used
just like macro data located in printer memory. If a memory card already containing macro data is
inserted in the printer, that macro data will be read into the printer automatically when the printer's
power is turned on.
The operation described here is performed when a memory card is inserted while the message display
reads
Ready
.
Note______________________________________________________________________
Macro data on a memory card has no effect on printer memory.
1.
Check that the memory card containing macro data is inserted. Bring up the menu
>Read
macro
on the message display. This display only appears if a memory card containing macro
data is inserted.
2.
Press the
ENTER
key.
?
will appear.
Press the
CANCEL
key to stop reading macro data.
3.
Pressing the
ENTER
key again will cause
Processing
to appear in the lower part of the
message display and macro data to be read from the memory card.
4.
After macro data has been read, the message display will return to
>Read macro
.
5.
Pressing the
EXIT
key will cause the message display to return to
Ready
.