Filter
Top Products
Setup and Connections
1- 13
Setup and Connections
Set up the printer according to the following steps.
1.
Install the printer on the paper feeder. ............................................................................Page 1-14
2.
Open the top cover. ........................................................................................................Page 1-15
3.
Install the toner container. ..............................................................................................Page 1-16
4.
Close the top cover. ........................................................................................................Page 1-19
5.
Adjust the paper guide on the paper feed cassette. .......................................................Page 1-19
6.
Add paper. ......................................................................................................................Page 1-22
7.
Open the paper stopper on the face-down tray (if required). ..........................................Page 1-24
8.
Open the face-up output tray (when the tray is being used). ..........................................Page 1-24
9.
Connect the printer to the computer. ..............................................................................Page 1-25
10.
Attach the power cord. ....................................................................................................Page 1-27
11.
Test the printer. ...............................................................................................................Page 1-28
12.
Test the interface with the computer. ..............................................................................Page 1-29
13.
Install the printer driver. ..................................................................................................Page 1-30