Filter
Top Products
Chapter 2 Operating the Page Printer
2-12
Switching Power On
Check that the power cord is securely plugged in at both ends. Check that the printer is connected to
the computer (See page 1-28).
1.
Push the power switch to the ON (
|
) position.
2.
Wait for the printer to warm up. During warm-up the message display indicates
Self test
.
3.
At the end of the warm-up period, the ON LINE indicator lights, and the message display
indicates
Ready
.
The printer is now ready to print.
Note______________________________________________________________________
If an error is detected while the printer is warming up, the ATTENTION indicator will light. A message
concerning the error will be displayed in the message display. (See
Chapter 4
.)
Power Switch
CAUTION
If the printer will not be used for a short period of time (overnight, etc.), turn
the power switch OFF (O). If it will not be used for an extended period of
time (vacations, etc.), remove the power plug from the outlet for safety
purposes during the time the printer is not in use.