Filter
Top Products
Chapter 1 Safeguards and Installing the Page Printer
1- 38
3.
Check that the message
Ready
is displayed in the printer's message display, and that the ON
LINE indicator is lit.
4.
Set the paper source to the multi-purpose tray by pressing the
FEED
key until the message
display indicates
MP tray
. The multi-purpose tray indicator on the control panel will flash, and
Add paper
will be displayed.
5.
Press the
MODE
key. Then use
+
or
–
keys to display
Paper handling >
.
6.
Press the
4
(
Form Feed
) key to display
>MP tray size
or
> MP tray type
, then
press the
ENTER
key so you can set the paper size or type to be fed from the multi-purpose
tray. See
Mode Select Menu
at the end of this manual.
The manner in which paper is fed in each of these modes is explained below.
First mode
1.
Press the
MODE
key. Then use
+
or
–
keys to display
Paper handling >
.
2.
Press the
4
(
Form Feed
) key to display
>MP tray mode
.
3.
After pressing the
ENTER
key, the mode display is changed by pressing the
+
and
–
keys.
Display
First
and then press the
ENTER
key.
>MP tray mode
First
4.
Press the
EXIT
key.
Note______________________________________________________________________
In this mode, the paper source indicator on the control panel does not change while paper is being fed
from the multi-purpose tray.