Filter
Top Products
Operating Procedures
2-17
Canceling Printing
Perform the following procedure when you wish to cancel printing after it has begun.
1.
Check if the message
Processing
is displayed in the message display.
2.
Press the
ON LINE
key to take the printer offline.
3.
Perform the necessary procedure on the computer to halt printing.
4.
Press the
CANCEL
key.
5.
The message
Print Cancel?
will appear in the message display and the interface to be
canceled will be displayed.
The following interfaces may be displayed.
Parallel
Serial
Option 1
(only when an optional interface is installed)
Option 2
(only when an optional interface is installed)
6.
Selecting the interface to cancel using the
+
or
–
key and then press the
ENTER
key. Printing
from the interface selected will be stopped.
A few pages may be printed even after the
CANCEL
key is pressed as remaining data received
before the
CANCEL
key was pressed is printed.
The message
Print Cancel? Current job
will also be displayed when the
CANCEL
key is pressed for the purpose of stopping the printing of status pages or font lists from the
control panel. When the
ENTER
key is pressed, the message
Cancelling data
appears
in the message display and printing stops after the printer finishes printing the current page.