Filter
Top Products
Configuring Interfaces
2-27
Configuring Interfaces
The printer is equipped with both a parallel and serial interface. Independent settings can be made for
each interface. Optional interfaces can also be installed.
To configure each interface, press the
MODE
key and use the
+
or
–
key to select the interface you
wish to make settings for.
Note______________________________________________________________________
This interface selection does not select which interface data will be received from. The printer
automatically selects that interface.
Parallel Interface
The parallel interface mode of this printer supports a bi-directional/high-speed mode. Normally, this
interface is used under the default setting
Nibble (high)
, see
Appendix C
. After setting the
interface, be sure to reset the printer or turn the power off at least once. The new setting will be
enabled thereafter.