Filter
Top Products
General Features 2 of 4
5 - 38 User Tools Settings
General Features 2 of 4
Duplex Mode Priority
You can select the type of the Duplex function effective when the machine is turned on, Energy
Saver mode is off, or Auto Reset is on.
Default: 1 Sided > 2 Sided
Copy Orientation in Duplex Mode
You can set the copy orientation when making two-sided copies.
Default: Top to Top
Original Orientation in Duplex Mode
You can set the original orientation when making two-sided copies.
Default: Top to Top
Change Initial Mode
You can select the initial mode or Program No.10 as the mode effective when the machine is
turned on, or modes are cleared.
Default: Standard
Max.Copy Quantity
The maximum copy quantity can be set between 1 and 999.
Default: 999Sheets.
Tone: Original remains
The beeper (key tone) sounds when you forgot to remove originals after copying.
Default: On
If the “Panel Tone” of the User Tools (System Settings) setting is “Off”, the beeper does not sound
irrespective of the “Tone: Original on Platen” setting. “Panel Tone” in the System Settings
manual.
Job End Call
You can choose whether or not the beeper sounds when copying is complete. If the “Panel Tone”
of the User Tools (System Settings) settings is “Off”, the machine beeps to notify you that the
machine did not complete a job for reasons such as copying was interrupted, the paper tray ran out
of paper or a paper jam occurred.
Default: On