Filter
Top Products
Using the Finisher Option
7 - 4 Using Finisher/Sorters
Selecting Stack Mode
Note: The optional finisher and bridge unit must be installed to use this function.
1
Touch the Stack key.
Note: If Stack is not shown,
it may be selected with User
Tools.
2
Using the keypad, enter the
number of copies you desire.
3
Set the originals in place, then
pess the Start key.
Stacking keeps the copies of each original together. Every other page set
is shifted for ease of separation. The shift tray of the Finisher provides
this function by sliding from side to side. The saddle stitch finisher shifts
only the top sheet of each set.