Filter
Top Products
G-6
Make sure the toner you add is correct for your copier before loading. See
the NOTE above.
Transparencies A clear plastic stock used to make an overhead transparency. Because
they are clear, they don’t feed from paper Drawers or Cassettes. However,
many Bypass Feed Trays are designed to handle transparency stock. Place
your transparency stock in the Bypass Feed Tray and use a normal copy
procedure.
Transport Belt The rubber surface on the under side of an ADF. It grips an original and
moves it across the Exposure Glass and returns it to the Document Exit
Area of the Document Feeder. To keep it operating correctly and to
prevent the buildup of dirt which can cause dirty copies, it must be
cleaned periodically.
User Codes An option, usually built into a copier that, when activated by a
Technician, requires the operator to enter a User Code to make copies.
The copier can contain many accounts thereby allowing the Key Operator
to track copies made by individuals or departments.
Zoom Keys The Zoom Keys are actually several keys that control the Enlargement or
Reduction of the image on the copy. In most cases, there is a 100% (actual
size) key, a key representing the highest Enlargement ratio, and a key
representing the lowest Reduction ratio. Pressing these last two keys steps
the copier optics in 1% increments. Pressing the 100% key returns the
copier to the actual size mode.